Tubes: All Sizes/Types

- Size: 20 x 1-1/8 - ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width: 25mm, 26mm, 27mm, 28mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 78g (32mm), 84g (60mm)

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- Standard 1mm tube thickness - Presta valve

Continental Light Tubes are made of a lightweight seamless butyl rubber and are individually tested for top quality. These tubes are nearly 30% lighter than standard tubes to make your bicycle easier to ride. - 42mm valve: 70 grams - 60mm valve: 80 grams - 80mm valve: 90 grams

Continental Supersonic Tubes are super light so you enjoy less rotating weight for easier acceleration and climbing. Made of seamless butyl rubber, they are individually tested for top quality. - 50 grams

Continental bicycle tubes are made of seamless butyl rubber and are individually tested for top quality. - 42mm valve length

- Designed to improve rotational stability by decreasing rotational mass at the valve body - Lightweight aluminum Presta-valve body - Removable valve core - Extenders are available and sold separately

WeThePeople innertubes are made of high-quality rubber and work very well to keep air in your tires. Designed for today's wider tires, they keep you rolling smoothly in all conditions.

WeThePeople innertubes are made of high-quality rubber and work very well to keep air in your tires. Designed for today's wider tires, they keep you rolling smoothly in all conditions. These are for 22-inch tires.

The premium latex inner tube for cyclists who require the best performances. Latex tubes are light, supple, and they generate low friction between the tire. All these characteristics work together to reduce rolling resistance. - Light and supple - Reduced rolling resistance - Removable valve core

Even lighter, even more compact, and ideal as a spare, the S-Tubo-MTB tubes were developed to have a minimum possible packaging size. With a removable valve stem, the tubes have a size of only Ø3.5cm x 5cm height when packaged. The puncture resistance is the same as with standard butyl rubber tubes but with a weight of only 45g (for 29"). - 42mm valve length

At a featherweight 23g, the super-compact (when rolled up) S-Tubo-Road tubes stand out with very low rolling resistance which outpaces standard rubber tubes. With a 78% smaller packed size and the same puncture resistance as standard tubes, the S-Tubo-Road is the perfect choice as a spare and can be the crucial factor when you’re riding long and hard. - Ready for disc brakes (not suitable for rim brakes)

Pumped-up performance: Tubo City/Tour tubes, with an increased wall thickness, are 3x tougher than standard rubber tubes and hold pressure much better. They're the perfect choice for longer rides through nature, everyday commuting, and for E-Bikes. - 42mm valve length

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

The Teravail Standard Schrader and Presta Valve tubes feature our widest variety of tube sizes and valve lengths with a proven record of high quality control and consistent availability. - 0.9mm wall thickness - Removable Presta valve core - Teravail Standard packaging features environmentally friendly soy ink printing on recycled cardboard - Size: 700c x 30 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 30 – 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 140g

- Size: 24 x 1-1/8 - ISO Diameter: 520 / 24" mini bmx - ISO Width: 25mm, 26mm, 27mm, 28mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 80g (32mm), 82g (60mm)

- Size: 26 x 2.4 – 2.7 - Can be used with fat bike tires 4.0" and under - ISO Diameter: 559 / 26" mtn - ISO Width: 60mm, 61mm, 62mm, 63mm, 64mm, 65mm, 66mm, 67mm, 68mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 256g

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 x 52/58 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- Size: 29 x 1.9 – 2.3 - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 176g (32mm), 178g (48mm)

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 92g (32mm), 94g (48mm), 96g (60mm), 98g (80mm)

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 102g (48mm), 104g (60mm)

- Size: 700c x 35 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 122g (32mm), 124g (48mm), 126g (60mm)

- Labeled Size: 12-1/2 x 1.75 – 2.125 - ISO Width: 47mm – 62mm - ISO Diameter: 203 / 12.5" - Shaft Type: Smooth - Flat Protection: Thorn Resistant - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl