Safety

Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Designed for touring and commuting or just about anytime you need added visibility; the UltraLite Bike Mirror offers versatility; light weight; and durability. At less than 2 ounces, it provides an amazingly wide field of view. Can be mounted almost anywhere you need it on your bike—handlebars of all types as well as forks and challenging applications like recumbents.

The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.

Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Every commuter bike needs a good bell, and this is it: It's a Brass Bell. It's small, it's loud, it's not ostentatious, It's a Brass Bell. Greet your friends, alert pedestrians, put a ring on it! - Fits 22.2mm handlebars

Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars

Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Weight: Black & Silver 17g, Brass 28g - Dome Diameter: 28mm (1.1") - Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters

Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Mirrycle's Incredibell Brass Duet Colors makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Its compact size lets you mount it just about anywhere on your handlebars. And, the bell's vibrant colors add a splash of personality to any bike. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Incredibell Clever Lever has a very pleasant double ding sound. The unique lever can be pivoted to any position so it can be easily reached by the thumb or another finger. - Dome Diameter: 38mm (1.5") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)

The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters